QUADRAX Q-LOCK UNIVERSAL ARTICULATED LIFT-ARM PLOW MOUNT SYSTEM
This arm allows the installation of ANY Quadrax plow blade on all ATV and
UTV (may require the use of the optional extension 165-12021). Raises the
plow 25 degrees higher than conventional systems. The use of this arm allows
you to ride a vehicle (ATV or UTV) equipped with a plow on a trailer or truck.
In addition, with this arm, you can push the snow further up your drifts.
The frame is made of a strong U-shaped steel arm going under the vehicle
to the rear and attaches to the hitch of the ATV. You will only need to have
a 2” hitch receiver on the ATV to install this plow. (Not included). The frame
is equipped with a shock absorbing device that minimizes the possibility of
damages to the vehicule in case of a hard impact between the plow and a fixed
The length of the frame is adjustable from 73” to 105”, allowing
installation on most ATV models. For UTVs or ATVs equipped with a track
system, the extension 165-12021 is available as an option, changing the
lengths of the frame for 99” to 134”. The frame is equipped with a rotating
plow support that adjusts from left to right in 5 positions and simply locks in the
desired position with a spring loaded T-handle pin.
Requires a winch equipped with an automatic brake. (Not included).
We strongly recommend the use of pulley assembly 165-35120
for vehicles with a low positioned winch.
165-931 Q-LOCK Universal articulated plow mount system $439.00
Quadrax plow accessories and replacement parts
For current and older Quadrax plow blades
Accessories for Q-Lock mounting system
165-12021 UTV Frame extender (for 99” to 134”) $40.10 ea
MOUNTING STEPS FOR Q-LOCK PLOW SYSTEM
Step 4-Lock hook
with receiver pin
Step 1-Install 2” ball
Step 5-Cross and
tie the chains
Step 3-Lift and engage
frame hook over the
allow 25˚ inclinations
Step 2-Roll vehicle over the
frame, making sure the tube
in centered with the vehicle