Note: Kits are included
Note: Kits are included
The Plexifairing 3™ features extended hand and leg protection to make riding
more comfortable. A protective gasket is closely fit around the headlight
opening. The Plexifairing 3™ also features QuickSet™ hardware, designed for
riders who enjoy the advantages of wind protection, but appreciate the luxury
of leaving the fairing home when desired.
70-N8413 H 22.00" (56.0cm) x W 31.50" (80.0cm)
70-N8513 H 22.00" (56.0cm) x W 31.50" (80.0cm)
70-N8613 H 22.50" (57.0cm) x W 29.75" (75.5cm)
70-N8693 H 21.00" (53.5cm) x W 29.50" (75.5cm)
70-N8803 H 20.50" (52.0cm) x W 33.00" (84.0cm)
70-N8863 H 20.50" (52.0cm) x W 31.50" (80.3cm)
70-N8963 H 21.00" (53.0cm) x W 29.75" (75.5cm)
MSRP : $239.95
The Plexistar 2™ increases ventilation while providing upper chest and hand
protection. This easy-to-install and easy-to-remove fairing is a favorite among
70-N8202 H 20.50" (52.0cm) x W 30.50" (77.5cm)
70-N8262 H 18.50" (47.0cm) x W 32.00" (81.5cm)
70-N8332 H 20.00" (50.5cm) x W 29.50" (75.5cm)
70-N8352 H 20.75" (52.7cm) x W 30.00" (76.2cm)
70-N8372 H 20.50" (52.0cm) x W 30.50" (77.5cm)
MSRP : $219.95
Owners of Honda's CB600F, CB900F, Suzuki’s SV650, 650 Gladius, SV1000
and Triumph's Bonneville T100, have been asking for "full-coverage" from
wind and weather. Answering the call, National Cycle offers the Plexifairing
GT™ which adds sporting performance to the legendary Plexifairing™ and
Plexistar™ shields. The Plexifairing GT™ offers outstanding style, great value,
and easy installation. There is also full protection for the rider’s head, hands,
torso and thighs. This sporting design offers a level of wind protection that
meets and exceeds even top-of-the-line touring bikes. Ingenious lower wind
deflectors noticeably cut down turbulence, noise and buffeting behind the
shield. The included, patented QuickSet™ hardware ensures easy installation
and removal, leaving minimal hardware on the bike when the shield is off.
70-N8101 H 29.00" (73.6cm) x W 30.00" (76.2cm)
MSRP : $299.95
70-N147 Brackets for non-tubular bar $29.95
70-N153 Pivot mount for non-tubular bar $15.95
70-N176 Extra large fork hose clamps $7.95
70-N177 1" (25mm) Quickset handlebar clamps $22.95
(1) Plexistar 2 recommended.
(2) 70-N147 and 70-N153 needed for non-tubular bars.
(3) Slight trimming needed for radiator clearance.
(4) 70-N153 and 70-N154 needed for mirror mount.
(6) Requires 70-N177 for 1” handlebars.
(8) Requires 70-N151 for 7/8” handlebars.
(22) Requires 70-N176: Supplementary Hose Clamps for Large Diameter Forks.
(53) Trimming will be required to allow clearance for turn signals.