Page 959

2017-ATV-UTV-SNOW

Motion Pro® Fork Seal Bullet • Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation. • Eliminates the need to wrap the fork tube with tape. • Set includes 36, 41, 43, 45, 46, 47, and 48 mm bullets. Motion Pro® Combo  Fork Damper • Aids in assembly and disassembly of most 41, 43 & 45 Kayaba and Showa inverted forks. • Is used in applications where the manufacturer recommends the following tools: Honda; OEM tool # 07PMB-KZ4010A/ Yamaha; OEM tool# YM-1423. • Hardened steel with black finish. Motion Pro® Fork Oil Level Gauge • For checking and adjusting the oil level on all conventional and single chamber cartridge forks. • Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments. • Syringe has a capacity of 60ml. • Can be used on bicycles equipped with front suspension. • Also replaces HD tool HD-590000-B and Buell tool B-590000-B. Motion Pro® Fork Compression  Valve Remover • Replaces Yamaha OEM YM-01500. • For removing the compression valve from cartridge. • 19mm drive hex / 36mm octagon. • Manufactured out of billet 6061 T-6 aluminum. • Applications: Yamaha: YZ 125/250 05-06, YZ 250F/450F 06. Motion Pro® Pro Fork Alignment • Quick and easy to use tool for aligning front forks to insure they are parallel from top to bottom. • Knurled adjustment screws for easy setup • Reduces friction and improves the performance of your front suspension • Reduces seal and bushing wear • Fits most MX and Off-Road motorcycles • Will work on 27 mm - 62 mm fork legs and tubes • Works on forks that are 140 mm to 220 mm on center. Motion Pro® Ringer Fork Seal • Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers • Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use • No more worrying about part of the tool falling off and damaging the fork leg • Perfectly weighted to drive seals • Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings • Limited lifetime warranty • Patent pending Motion Pro® Dual Chamber Fork Cap Wrench • 8 point box wrench for removing the fork cap on dual chamber closed cartridge forks on late model Yamaha’s. • 12 mm slot for holding the damper rod for removing the rebound bolt, which allows for the removal of the cartridge from the lower fork leg. • Made of billet 6061-T6 059-080117 $36.99 059-080429 49mm Wrench $19.99 059-080428 50mm Wrench $19.99 Motion Pro® Fork Cap Wrench • Designed for removing the fork caps on late model RMs & CRs. • Can be used for removal of a compression stack on late model RMs. • Features a 46mm end on one side and 50mm on the other side. 059-080236 46mm/50mm $21.99 059-080497 37mm $44.99 059-080488 39mm $44.99 059-080489 41mm $44.99 059-080490 43mm $44.99 059-080491 45mm $44.99 059-080492 46/47mm $44.99 059-080493 48mm $44.99 059-080494 49/50mm $44.99 059-080272 Set of 7 $28.99 059-080273 36mm Red $4.99 059-080274 41mm Blue $4.99 059-080275 43mm Green $4.99 059-080276 45mm Yellow $4.99 059-080277 46mm Black $4.99 059-080279 47mm White $27.99 059-080332 48mm Orange $4.99 059-080121 $22.99 059-080412 $24.99 059-080373 $14.99 960


2017-ATV-UTV-SNOW
To see the actual publication please follow the link above