Page 1316

2017-ATV-UTV-SNOW

1317 High Flow™ Intake for SkiDoo-BRP XP (except E-TEC) This High Flow™ Intake Kit for the SkiDoo-BRP XP increases the air intake surface area by 33% to reduce the chance of the intake plugging in powder snow conditions. It is located higher than the stock intake and within reach of the rider so that any snow that collects on it can be easily wiped away. This kit consists of a molded plastic adapter that seals between the stock air box and the hood along with an intake grate that utilizes our pre-filter material that repels snow and water while passing air right through. This kit is a must for anyone riding powder snow conditions. 167-14129 High Flow™ Intake, XP (except) E-TEC $82.95 High Flow™ Intake for SkiDoo-BRP REV except RT chassis models The REV’s stock air intake is restrictive and because of its placement, it is prone to plugging with powder snow and ice. This results in a significant loss in horsepower, which makes the sled very inconsistent when running in deep snow conditions. This High Flow™ Intake Kit corrects these problems by providing more than double the intake surface area for added airflow to the engine. Its placement, as well as its design, which utilizes a powder snow pre-filter that repels snow and water, reduces the tendency of powder snow and ice plugging by shedding the snow rather than allowing it to build up. 167-14119 High Flow™ Intake Kit for REV $99.95 167-14122 Intake Grate Only for REV $49.95 SLP Flow-Rite™ Intake Kits Eliminate air intake restrictions by installing the Flow-Rite™ in the dash for more air box feed. The Flow- Rite™ is supplied with a powder snow pre-filter that repels snow and water, yet passes air right through. A must for modified sleds. Sold per each. #167-14189 and 167-14194: SLP part numbers 167-14189 and 167-14194 are made using a rubber flange to attach the Flow-Rite™ to the surface that it is being installed in. This rubber flange conforms itself to a wide variety of contoured, shaped and textured surfaces for a universal mounting system. 167-14197: SLP part number 167-14197 is designed for ease of installation on flat or nearly flat surfaces. It requires a 2 1/2” size hole saw, which is readily available from any hardware store. Installation is a snap: hole saw the hole, debur the edges, clean hole saw shavings and snap Flow-Rite™ into place. Inside Diameter inches Outside diameter inches Hole diameter 167-14194 2” 2 11/16” 2 3/8” $22.95 167-14197 * 2” 2 3/4” 2 1/2” $22.95 167-14189 2 1/2” 3 5/8” 3 1/8” $22.95 * Snap-In style Flow Rite™ (Part #167-14197) is recommended for use in the dash only. Use rubber flange style for other locations. Polaris Edge: 2” Polaris GEN II: 2 1/2” IQ RMK/Switchback: 2” Ski-Doo ZX: 2” Yamaha Viper: 2 1/2” Yamaha SX & MM: 2 1/2”


2017-ATV-UTV-SNOW
To see the actual publication please follow the link above